Troubleshooting - Breville BEM800XL Livret D'instructions

TROUBLESHOOTING

pOSSIBLE pROBLEM
Mixer will not work
Cannot set the time on the
count-down timer.
Mixer suddenly switches off
and 'E1' error message is
flashing on the LCD screen
Mixer suddenly switches off
and 'E2' error message is
flashing on the LCD screen
32
BEM800XL_IB_v10.indd 32
EASY SOLUTION
• Check that the power plug is securely inserted into the
wall outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a different outlet.
• Reset the circuit breaker if necessary.
• For additional safety, the Mixer is fitted with a Thermo Cut-Off.
In the event of severe overheating, the Mixer will automatically
shut down to prevent damage to the motor. Allow more time
for the motor to cool before restarting the Mixer.
• Ensure the Speed Control Dial is in the 'OFF' position before
trying to set the count-down timer.
• The Mixer is equipped with an electronic protection cut-off
which will activate if the motor is stalled or overloaded. This is
normally a result of excessive ingredients being processed at
one time. Should the Mixer go into this mode, the LCD screen
will display 'E1', the LED Speed Indicator will flash and an
alert will sound 3 times.
• Turn the Speed Control Dial to the 'OFF' position and remove
the power plug from the wall outlet. Remove some of the
ingredients from the mixing bowl before restarting the Mixer.
• The Mixer is equipped with a self-resetting safety device
which safeguards against overheating of the motor with
excessive loads. If overheating occurs, the Mixer will
automatically activate the overheating protection device
and the motor will switch itself off. Should the Mixer go into
this mode, the LCD screen will display 'E2', the LED Speed
Indicator will flash and an alert will sound 3 times.
• Turn the Speed Control Dial to the 'OFF' position and remove
the power plug from the wall outlet. Wait at least 15 minutes
before restarting the Mixer.
19/11/09 3:17 PM