Attaching The Pouring Shield; Removing The Pouring Shield - Breville BEM800XL Livret D'instructions

BEFORE FIRST USE

Attaching the pouring Shield

1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
'OFF' position.
2. Attach the mixing bowl and either the
scraper beater, flat beater, wire whip or
dough hook.
3. Press the 'Tilt-Release' button and
simultaneously use the Lift Assist
Handle to lower the mixer head until it
locks into the closed position.
4. Slide the main ring into position on
top of the mixing bowl then attach the
pour spout.

Removing the pouring Shield

1. Ensure the power cord is unplugged
and the Speed Control Dial is in the
'OFF' position.
2. Detach the pour spout then slide the
main ring from the mixing bowl.
3. Press the 'Tilt-Release' button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
4. Remove the attachment from the
Attachment Shaft then remove the
mixing bowl from the Bowl Locking
Recess.
BEM800XL_IB_v10.indd 15
15
19/11/09 3:16 PM