Columbus McKinnon Yale CPV Serie Mode D'emploi D'origine page 25

25
Welding on optional trolley, hook and load chain is strictly forbidden. The load chain must never be used as a ground connection during
welding.
Side pull, i. e. side loading of the top hook (or the trolley for models with trolley), the housing or the bottom block is prohibited. The
optional trolley must be perpendicular to the load at any time.
The load chain must not be used for lashing purposes (sling chain).
Do not knot or shorten the load chain by using bolts, screws,
screwdrivers or other devices. Load chains that are integral part of the hoist/trolley are not allowed to be repaired.
Do not remove the safety latch from the suspesion hook or load hook.
Do not use the chain end stop as an operational limit device.
©
2016 Columbus McKinnon Industrial Products GmbH