Checchi & Magli TEXDRIVE BEST Manuel D'utilisation Et D'entretien page 93

Replacing the ploughshare
Proceed as outlined below.
1) Remove the circlip (A).
2) Unscrew the wing nut (B).
3) Remove the washer (F).
4) Lift and hold the clamping device (D).
5) Push the share forwards and turn it so
it is facing downwards.
6) Hold the ploughshare and remove
the screw (C) and washer (E).
For the assembly, carry out the same op-
erations as for disassembly but proceed-
ing in reverse order.
Information
During assembly, fit the Plant Control device inside
the ploughshare.
Make sure the flexible plate is centred with respect
to the share (see "Adjusting the flexible plate cen-
tring").
English language
INFORMATION CONCERNING REPLACEMENTS
UN41-0448AM
43
A B
F
E C
8
D
Use and maintenance