Checchi & Magli TEXDRIVE BEST Manuel D'utilisation Et D'entretien page 59

Information and safety signs
Danger - Warning
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
C D
TEXDRIVE BEST
UN41-0443AM
A) Hazard plate: read the use and maintenance manual
before using the work vehicle.
B) Hazard plate: do not remain on the seat with the
work vehicle lifted off the ground.
C) Hazard plate: switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
D) Information plate: strap up at the anchor points
shown to lift the work vehicle.
E) Hazard plate: this highlights a risk of hands being
cut and sheared between the dispenser and inner
components.
English language
TECHNICAL INFORMATION
A B
C
G
G
9
The illustration shows the locations and meanings of the
signs affixed.
D
E
F) Information plate: lubricate the chain inside the
casing to which the plate is affixed.
G) Information plate: this shows the greasing points.
H) Information plate: this indicates rotation of the part
to which the plate is applied, showing the direction
required to achieve the desired effect.
L) Information plate: hook up the work vehicle at the
points shown to lift it.
The plates (E - F - G - H) are fitted on every planting unit.
2
L
TEXDRIVE BEST DT
Use and maintenance