Checchi & Magli SP 140 Manuel D'utilisation Et D'entretien page 54

Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Wash the work vehicle completely.
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Repair any damaged or worn parts.
4) Check that the main fixing nuts and bolts are tight.
5) Check the lubricant level in the gearbox and if neces-
sary top up (see "Checking the gear box oil level").
English language
INFORMATION FOR USE
6) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
7) Park the machine carefully on flat ground in a dry
area protected from the weather.
8) Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
20
6
Use and maintenance