Checchi & Magli SP 140 Manuel D'utilisation Et D'entretien page 46

Adjusting the support wheel
Adjustment of the support wheels is used to change the
tilt of the rod conveyor according to the working depth.
Carry out the operations described.
1) Move the clamp (A) to release the lever (B).
2) Turn the lever (B) as required.
Lowering the wheel makes the ploughshare pen-
etrate the ground further and vice versa.
3) Secure the lever with the clamp (A).
Adjusting the ploughshare tilt
Adjusting the ploughshare angle keeps the ploughshare
properly tilted when the working depth and the rod con-
veyor tilt are increased.
Carry out the operations described.
1) Loosen the nut (A).
2) Turn the nut (B) to alter the title of the ploughshare.
3) The shift is shown on the graduated rod (C).
4) Tighten the nut (A).
English language
ADJUSTMENT INFORMATION
UN41-0745CP
UN41-0746CP
12
B
A
A
B
C
Use and maintenance
5