15 7.10 Low Battery/Manual Bypass - Napoleon STARfire Serie Mode D'emploi

7.8 continuous pilot/intermittent pilot (CPI/IPI) selection
A. When the transmitter is in the "OFF" position, use the Mode Key to guide
you to the CPI mode icon.
B. Press the UP/DOWN to switch between IPI and CPI modes. A single BEEP
will confi rm reception of the command.
note:
If the appliance is equipped with a CPI/IPI toggle switch, set the switch to CPI
position to enable remote CPI operation. If the switch is set to IPI then it will
only work in IPI regardless of what is set on the remote control handset.
ADD TITLE: CHILD PROOF FUNCTION
7.9 key lock
This function will lock the keys to avoid unsupervised operation.
A. Press the MODE and UP keys at the same time.
B. To de-activate this function, press the MODE and UP keys at the same time.
7.10 low battery/manual bypass
The life span of the remote batteries depends on various factors: quality of the batteries, the
number of ignitions, etc.
When the transmitter batteries are low, a Battery Icon will appear on the LCD display before all
battery power is lost. When the batteries are replaced this icon will disappear.
When the receiver batteries are low, no "beep" will be emitted from the receiver when it
receives an ON/OFF command. This in an alert for the receiver that there's low battery. When
the batteries are replaced the "beep" will be emitted from the receiver when the ON/OFF key is pressed.
If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the three
position slider switch on the receiver to the "ON" position. This will bypass the remote control feature and the appliance
main burner will come on if the gas valve is in the "ON" position.
operation
76 76
°F
IPI CPI
76
°F
76
W415-2372 / A / 11.14.19
EN
°F
°F
41