Napoleon STARfire Serie Mode D'emploi page 26

framing
EN
Depending on fi nishing material thickness, the frame assembly can be adjusted out from the appliance by 1 1/2"
(38mm), as shown below:
note:
Framing dimensions will vary depending on fi nishing material thickness. For recessed depths greater than 2"
(51mm), refer to "non-combustible fi nishing material" section.
note:
If installing your non-combustible board directly to the appliance, remove the steel framing members and
discard. This is necessary for recessed applications greater than 1 1/2" (38mm) deep or for applications with
recesses greater than 1 1/2" (38mm).
26
W415-2372 / A / 11.14.19
1 1/2"
(38mm)
Thick Finishing Material
SIDE VIEW
1/2"
(13mm) Thin Finishing Material