7.3 Temperature Display; 7.4 Smart Thermostat; 10 7.5 Room Temperature - Napoleon STARfire Serie Mode D'emploi

operation
EN
7.3 temperature display
A. With the system in the off position, press the Temperature Key and the
mode key at the same time to change from degrees F to C.
B. Look at the LCD screen on the transmitter to verify that a C or F is
visible to the right of the Room Temperature display.

7.4 smart thermostat

The Smart Thermostat function adjusts the fl ame height according to the difference between
the set temperature and the actual room temperature. As the room temperature gets closer to
the set point the Smart Function will automatically adjust the fl ame down.
A. Press the thermostat key until the word SMART appears to the right of the temperature
bulb graphic.
B. To adjust the set temperature, press the mode key until the desired set temperature is
displayed on the LCD screen at the transmitter.
7.5 room temperature
The remote transmitter can operate as a room thermostat.
The thermostat can be set to a desired temperature to control the comfort level in the
room.
A. Press the thermostat key. The LCD display on the transmitter will show that the
room is on and the set temperature is now displayed.
B. To adjust the set temperature, press the mode key until the desired set
temperature is displayed on the LCD screen of the transmitter.
7.6 fl ame height
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the Down
arrow key once and it will reduce the fl ame height by one step until the fl ame is turned off.
The Up Arrow Key will increase the fl ame height each time it is pressed. If the Up arrow key is pressed while the
system is on but the fl ame is off, the fl ame will come on at the high position. A single "beep" will confi rm reception of
the command.
7.7 night light dimmer control
ADD TITLE: Night Light Dimmer Control
The auxiliary function controls the Night Light
A. Use the Mode Key to guide you to the Night Light icon.
B. The intensity of the output can be adjusted through 6 levels.
Use the UP/DOWN arrow keys to adjust the output level.
single beep will confi rm reception of the command.
40
W415-2372 / A / 11.14.19
76 76
°F
OFF
Flame Off Flame at level 1
TM with dimmable control.
°F
73
SMART
MAX
Room Temperature
ON
68
Set Temperature
76
°F °F
Flame at level 5 Flame at "Hi" level 6
76
°F
OFF
A
°C
23
76
°F
76
°F
76
°F
Hi
76
°F