Incorrect Operation - Columbus McKinnon TIGRIP TSD Mode D'emploi

12
If longer sheets of metal or profiles are to be transported, we recommend that two or more
load lifting attachments in combination with a spreader beam be used to prevent load sway
and lateral tensile forces.
Always transport the load slowly, carefully and close to the ground.
Only use crane hooks with a safety latch.
The suspension eye of the load lifting attachment must have sufficient space in the crane hook
and be freely articulating.
In the case of malfunctions, stop using the load lifting attachment immediately.
I O
NCORRECT PERATION
(list not complete)
Do not exceed the rated load capacity (WLL) of the unit.
Only loads within the specified jaw capacity must be picked up.
Any modifications of the load lifting attachment are prohibited.
It is forbidden to use the load lifting attachment for the transportation of persons.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
Only one load may be transported at a time with the load lifting attachment.
Always insert the load fully into the mouth of the clamp.
©
2016 Columbus McKinnon Industrial Products GmbH