ABB ACS880-07 Manuel D'installation page 310

310 Fonction STO
ACS880-07, -17, -37, -07CLC, -07LC, -17LC, -37LC, ACS880 multidrives and ACS880 liquid-
cooled multidrives: Prevention of unexpected start-up (option codes +Q950; +Q957),
Emergency stop (option codes +Q951; +Q952; +Q963; +Q964; +Q978; +Q979), Safely-limited
speed (option codes +Q965; Q966)
are in conformity with all the relevant safety component requirements of the Supply of Machinery
(Safety) Regulations 2008, when the listed safety functions are used for safety component
functionality.
The following designated standards have been applied:
EN 61800-5-2:2007
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1:2018
The following other standards have been applied:
EN 61508:2010, parts 1-3
EN 61800-5-2:2017
The products referred in this declaration of conformity fulfil the relevant provisions of other UK
statutory requirements, which are notified in a single declaration of conformity 3AXD10001346556.
Authorized to compile the technical file:
ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT
Helsinki, 28 May 2021
Signed for and on behalf of:
Peter Lindgren
Vice President, ABB Oy
2/2
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements - Functional
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Safety of machinery – Safety-related parts of control systems.
Part 1: General principles for design
Safety of machinery – Safety-related parts of the control systems.
Part 2: Validation
Safety of machinery – Electrical equipment of machines –
Part 1: General requirements
Functional safety of electrical / electronic / programmable
electronic safety-related systems
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements - Functional
Vesa Tiihonen
Manager, Reliability and Quality, ABB Oy
3AXD10001326695 Rev. A