GEZE E-ISM Boxer Instructions De Montage page 13

E-ISM Boxer
6.2 Mounting fixed leaf guide rail
X
Insert the sliding pad into the guide rail for the fixed leaf, making sure it faces the right way (1.).
X
Fasten guide rail for fixed leaf with 2 screws (2.) (tightening torque: 2 Nm).
X
Clip the end cap onto the guide rail (3.).
X
Thread the cable and the steel wire (ball to the moving) leaf through the chamber to the recess in the guide
rail of the moving leaf (4.).
X
Please make sure that the cables are retained in the upper chamber of the guide rail (5.).
All screwing torques are to be adjusted on site, if necessary.
6.3 Mounting moving leaf guide rail and connect 24V fixed leaf cable
X
Insert the sliding pad into the guide rail for the moving leaf, making sure it faces the right way (1.).
X
Attach the steel wire to the release lever (2.).
X
Fasten guide rail for moving leaf with 2 screws (3.) (tightening torque: 2 Nm).
X
Clip the end cap onto the guide rail (4.).
X
Please make sure that the cables are retained in the upper chamber of the guide rail (5.).
X
Connect the fixed leaf cable to the connection terminal SF (6.) (cut excess cable).
All screwing torques are to be adjusted on site, if necessary.
Mounting and securing
Fig.: 6.2.1
Red ='+' (terminal 1)
White = '–' (terminal 2)
Fig.: 6.3.1
GB 5