Side Panels; Zug2 Grille Panel Dimensions - Monogram ZIFS360NHLH Instructions D'installation

Design Guide - Standard Installation

SIDE PANELS

Side panels must be used whenever the sides of the
unit will be exposed. The 1/4" (0.63 cm) side panels
will slip into the side case trim. Secure the panels to
the unit with stick-on hook and loop fastener strips.
Order the side panels from the cabinet manufacturer.
• Cut a notch in the top front corner as shown to allow
clearance for corner keys in the front side trim.
* Depending on
installation height.
31-49140-2
24"
3/16"
1-7/8"
*84"
*3" to 4"
2-9/16"

ZUG2 GRILLE PANEL DIMENSIONS

The ZUG2 unified grille panel kit provides for the
installation of a framed or overlay grille panel.
Framed Panel Dimensions
1/4" (0.63 cm)
Framed Panel 69-7/8" (177.48 cm)
Overlay Panel Dimensions
1/4" (0.63 cm)
Backer Panel 69-7/8" (177.48cm)
0.10" (0.25 cm) 68-1/2" (97.79 cm)
Spacer Panel
3/4" (1.9 cm) 70-1/8" (178.12 cm)
Overlay Panel
IMPORTANT NOTE: The maximum weight for the
unified grill is 25 pounds (11.24 kg).
Assemble the overlay panels in the same manner
as the door panel.
11
A (Width) B (Height)
8-7/8" (22.54 cm)
A (Width) B (Grille Height)
8-7/8" (22.54 cm)
7-5/8" (20 cm)
9" (22.86 cm)