Monogram ZIFS360NHLH Instructions D'installation page 26

Design Guide - Flush Installation
1/2" (1.27 cm) OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed on
trimmed models. The overlay panel must be secured to a 1/4"
(.63 cm) thick backer panel which slides into the trim. A spacer panel
0.10" (0.25 cm) thick must be placed between the overlay and backer
panel.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer panel, left to right and top to
bottom. Secure the panels with glue.
• Refer to the following chart for locating the backer panel to the over-
lay panel. Secure the overlay panel to the backer panel with glue
and screws. Screws must be countersunk into the backer panel.
Hinge Side
Door Back
Fresh Food Back
Backer with
Overla Panel
Assembl
A
IMPORTANT NOTE: Maximum total weight for the
assembled panels:
•
Fresh food door panel – 75 lbs. (34.02 cm)
•
Grille Panel – 18 lbs. (8.16 cm)
C
D
B
.250" + .10" + .50" = .850" Total Panel Thickness
(0.635 cm + 0.254 cm + 1.27 cm = 2.159)
Grille Back
C
A
A
Door Panel 2-1/16"
(5.24 cm)
Grille Panel 2-1/16"
(5.24 cm)
Panel Dimensions
Fresh Food Door
1/4" (0.63 cm) 69-5/16" x 33-7/8"
Backer Panel (176.05 cm x 86.04 cm)
.10" (0.25 cm) 67-15/16" x 32-1/2"
Spacer Panel (172.56 cm x 82.55 cm)
1/2" (1.27 cm) 69-3/4" x 38"
Overlay Panel (177.16 cm x 96.52 cm)
26
Door
1/2"
Overla
Panel
1/4"
.10"
Backer
Spacer
Panel
B
D
B C
2-1/16" 3/16"
(5.24 cm) (0.47 cm) (0.63 cm)
2-1/16" 1-7/16"
(5.24 cm) (3.65 cm) (0.31 cm)
Grille
8-7/8" x 33-7/8"
(22.54 cm x 86.04 cm)
7-5/8" x 32-1/2"
(16.37 cm x 82.55 cm)
10-7/16" x 38"
(26.51 cm x 96.52 cm)
D
1/4"
1/8"