Customization Basics; Refrigerator Location - Monogram ZIFS360NHLH Instructions D'installation

Design Guide - Stainless Steel Installation

CUSTOMIZATION BASICS:

Custom Handles and Accessory Kits
Professional Style Stainless Steel Models
Stainless steel wrapped refrigerators have beveled
edges and professional-style handles. These models
are shipped ready for installation.
Stainless Steel Wrapped Models
Stainless Steel wrapped models have wrapped doors
and grille panel, beveled edges, and tubular stainless
steel handles that coordinate with other Monogram
appliances. These models are shipped ready for
installation.
Optional Accessory Kits
• ZUGSS2: For side-by-side installation of two
stainless steel wrapped models. This kit provides a
unified stainless steel grille panel to span the width
of two units.

REFRIGERATOR LOCATION

• Do not install the refrigerator where the tempera-
ture will go below 55°F (13°C). It will not run often
enough to maintain proper temperatures.
• Do not install the refrigerator where temperatures
will go above 100°F (37°C). It will not perform
properly.
• Do not install the refrigerator in a location exposed
to water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it
fully loaded.
43