Safety; Checking Delivery - ProMinent DULCOTEST CTE Mode D'emploi

1
The sensor is to be used only for the measurement and control of the
concentration of total chlorine. We do not accept liability for injury to persons
or damage to property if the operating instructions in this manual have not
been followed, or the original state of the sensor has been changed, or the
sensor has been used under conditions other than those specified. We refer
users emphatically to the safety guidelines in the following chapters.
2
Unpacking • Check that the delivery is intact. In case of damage please contact your
• Check that the delivery is complete by comparing your order with the
Scope
of delivery • 1 sensor CTE 1
• 1 bottle containing electrolyte (50 ml) and nozzle
• 1 membrane cap for replacement
• 1 operating instructions
• 1 small screwdriver
®
ProMinent

Safety

CAUTION
• Only trained and authorised staff should operate the
sensor and its peripherals.
• If installing the sensor outside Germany, please comply
with the corresponding local regulations.

Checking delivery

NOTE
Keep the packaging and the polystyrene shipping parts for
the sensor in case of repair.
supplier.
delivery documents.
Safety / Checking delivery
27