ProMinent DULCOTEST CTE Mode D'emploi page 31

Measurement
station In a complete measuring station the DULCOTEST
connected to the DULCOMETER
two-wire signal lead. The controller is connected to the power supply.
The sensor is mounted either in the DLGIII or in the modular DGM in line
probe housing. A sampling tap (see Ordering information, Chapter 15) for the
external DPD-measurement (see Calibration, Chapter 8.2) can be screwed
into the base plate of the DGM.
The in-line probe housing is hydraulically connected to the sample water flow.
Fig. 2
Measurement
station
®
ProMinent
®
Cl
R?
DULCOMETER
STOP
Sample water
inlet
Design and function
®
CTE 1 sensor is electrically
D1C, chlorine controller via a standard
DULCOMETER
D1C, chlorine
80
60
40
25
l/h
®
Two-wire signal
lead
®
DULCOTEST
CTE 1
Sample water
outlet
DGMa in line
probe housing
Sampling tap
31