Fore/Aft Isolator; Fore/Aft Adjustment; Seat Pan Angle Adjustment - Grammer MAXIMO Professional Mode D'emploi

Seat functions and operation
* if fitted ** depending on model
24

Fore/aft isolator

Under certain driving conditions (for example
with a trailer attached), it is useful to activate
the fore/aft isolator. This means that shock
impacts in the driving direction can be better
absorbed by the driver seat.
Position 1 = fore/aft isolator off
Position 2 = fore/aft isolator on
After the adjustment of position 1, the
locking lever must latch into the desired
position.
For that, the seat must be pressed backwards
until it latches with an audible click.
It should not be possible to move the
fore/aft isolator into another position when it is
locked.

Fore/aft adjustment

The fore/aft adjustment is released by lifting the
locking lever.
WARNING. Risk of accident!
Do not operate the locking lever
while driving.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to move
the driver's seat into another position when it is
locked.
Do not lift the locking lever with your leg
or calf.

Seat pan angle adjustment

The angle of the seat pan can be individually
adjusted.
To adjust the angle of the seat pan, pull the left
handle upwards. By exerting pressure on or off
the front or rear part of the seat pan it can be
moved to the desired position.
*** optional extra
GB