Backrest Adjustment; Absorber; Fore/Aft Isolator - Grammer MSG97AL/722 Mode D'emploi

1
* if fitted
3
2
Seat functions and operation

Backrest adjustment

The backrest is adjusted using the locking
lever (arrow).
 
The locking lever must latch into the
desired position. It should not be possible to
move the backrest into another position when
it is locked.
When the backrest is folded forward,
fluted metal locking devices on either side –
left and/or right – protrude from the bottom of
the backrest and, during the adjustment pro-
cedure, can cause shearing and crushing of
the body of the person performing this task.
– DO NOT REACH INTO THIS DANGER
ZONE –

Absorber *

The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The cushioning effect can be individually ad-
justed for this purpose.
Turn the lever to the desired position and re-
lease
1 soft
2 medium
3 hard
Position 2 is the basic setting recommended
by the manufacturer for an average driver's
weight.

Fore/aft isolator *

Under certain driving conditions (for example
with a trailer attached), it is useful to activate
the fore/aft isolator. This means that shock
impacts in the driving direction can be better
absorbed by the driver seat.
Position 1 = fore/aft isolator off
Position 2 = fore/aft isolator on
23