Assembly; Before You Assemble; This Table Saw Stand - skilsaw SPT99 Consignes D'utilisation/De Sécurité

The SKILSAW Table Saw Stand for SPT99 is
designed for job site use. This unit sets up and
folds quickly, and is easily loaded or unloaded by
one person into a truck.
TOOLS REQUIRED:
Phillips screwdriver, 1/2 inch open end wrench,
11/16 inch open end wrench, or adjustable
wrench.
5

Assembly

Sort out and account for all parts to make sure
that you have all the necessary materials to
assemble your stand. Do not discard packing
material until all parts are accounted for.
1
3
7
-17-
BEFORE YOU ASSEMBLE THIS
TABLE SAW STAND:
2
4
STAND PARTS
1 Latch tubes (pre-attached to Main Tubes)
2 Wheels
3 Material support (pre-attached to Main
Tubes)
4 Handle bar
5 H-Shaped tube
6 Main tubes
7 Leg tubes pre-attached to Main Tubes)
6