Kessel EasyClean free Auto Mix Instructions D'installation Et D'utilisation page 33

4.6 Establishing electrical connections
Connection diagram
(a) Mains (400 V AC 50Hz)
(b) Pump (400 V AC 50Hz)
(c) Hot water solenoid valve (230 V AC, 50 Hz, closed when currentless)
(d) Cold water solenoid valve (230 V AC, 50 Hz, closed when currentless)
(e) Potential-free contact (warning)
(f) Potential-free contact (fault)
(g) Remote control
Connecting the control unit
Select a suitable position for attachment of the control
unit.
Set up connections (pump, solenoid valve(s) if necessary,
mains cable) in accordance with the connection diagram.
Carry out a functional test (see "Functional test",
page 36).
016-188_01 33 / 138