Selecting A Configuration Option - SMA SUNNY BOY 3.0-US Instructions D'installation

SMA Solar Technology AG
7.5

Selecting a configuration option

After having assigned the password to the Installer or User, the Configuring the Inverter page
opens.
A
E
D
Figure 14 : Layout of the Configuring the Inverter page
Position Designation
A Device information
B User information
C Skip configuration
D Checkbox
E Configuration options
Configuration options:
On the Configuring the Inverter page, different configuration options are available to choose
from. Select one of the options and proceed for the selected option as described below. SMA
Solar Technology AG recommends carrying out the configuration with the installation assistant. This
way, you ensure that all relevant parameters are set for optimal inverter operation.
• Adoption of configuration from a file
Installation Manual
Description
Provides the following information:
• Device name
• Inverter serial number
• Inverter firmware version
Provides brief information on the listed configuration
options
Offers the option of skipping the inverter configura-
tion and go directly to the user interface (not recom-
mended)
Allows you to choose not to have the displayed page
displayed again when the user interface is called up
again
Provides a selection of the various configuration op-
tions
SBxx-1SP-US-41-IA-xx-12
7 Commissioning
B
C
59