SMA SUNNY BOY 3.0-US Instructions D'installation page 25

SMA Solar Technology AG 5 Mounting
Dimensions for mounting:
203 203
(7.99) (7.99)
1 79.2 5 179.25
(7.06) (7.06)
153 153
(6.02) (6.02)
126.75 126.75
(4.99) (4.99)
9 x 16
(0,34 x 0,63)
535
(21.06)
Figure 5 : Position of the anchoring points(Dimensions in mm (in))
Recommended clearances:
To guarantee optimal operation and adequate heat dissipation for the inverter as well as a good
connection quality when using the SMA Cellular LTE Modem Kit, the following requirements for
clearances should be observed. This will prevent the inverter power output from being reduced due
to excessive temperatures. However, smaller clearances are permitted without causing any risk.
Installation Manual SBxx-1SP-US-41-IA-xx-12 25