Noise Emission; Delivery Specification - Mafell PSS 3000 Notice D'emploi Et Liste Des Pièces Détachées

Operating weight guide track extension
Total operating weight
Saw blade drive (MAFELL universal motor, radio and TV interference suppressed):
Nominal voltage
b
b Nominal frequency
Power input (normal load)
Power output
Nominal power consumption (normal load)
b
b
Drive of forward momentum (permanent magnet DC motor):
Nominal voltage
Nominal input
Nominal power consumption
Speed nominal load
Total of connection values:
Nominal input
Nominal power consumption
1.4

Noise emission

In accordance with EN ISO 3746, EN ISO 11202 and annex P of ISO 7960, noise was measured with the follow-
ing deviations:
Saw blade: TCT saw blade Ø 160 mm (6 1/4 in.), 32 teeth
Workpiece: uncoated panel 16 mm (5/8 in.), length 1200 mm (47 in.), initial width 700 mm (27 9/16 in.)
Cutting of strips 40 mm (1 9/16 in.) wide
Speed of forward momentum: 17 m/min (55.8 ft/min.)
Measuring of operating noise: cutting moment + returning movement of saw with machine switched on
Position of microfone at the work place 300 mm (11 3/16 in.) behind the transverse side of the system and
concentric system, 1.5 m (59 in.) above the ground
Operation
b
The measured risk K is 4 dB.
The stated values do not take any series variance into account and are not suitable for determining the immis-
sion sound power level, since this varies depending on the operating time, the machining operation concerned
and environmental factors. The immission sound power level can consequently be determined only in the indi-
vidual instance on the premises of the system user.
1.5

Delivery specification

Panel saw system PSS 3000 complete with:
1 guide track extension
1 TCT saw blade Ø 160 mm (6 1/4 in.),
24 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 bow-shaped handle
a
1 connecting cable 6 m/19.6 ft (5 m/16.4 ft – CH,
6 m/13.1 ft – GB)
230 V~
50 - 60 Hz
1100
630 W
4,8 A
Sound power level
107,9 dB (A)
1 service tool in holding device on the machine
housing
1 silicone spray
1 operating manual
1 folder "Safety instructions"
-24-
3.6 kg (7.9 lbs)
17 kg (37.4 lbs)
110 V~
50 Hz
1100 W
630 W
10 A
Sound pressure level at the workplace
94,9 dB (A)
12 V
32 W
2.65 A
3750 rpm
1240 W
5.4 A