Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell Z 5 Ec Traduction De La Notice D'emploi Originale

2.3 Technical data

Cutting depth
Roller diameter
Saw band width
Saw band length
Saw band gauge max.
Band pivoting
Idling speed
Cutting speed when idle
Hose connector diameter
Weight without mains cable
Universal motor with radio and television
interference
Input power continuous operation
Current at nominal load

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1:
Idling
The noise measurements were conducted using the band saw blades included in the delivery specification.
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable band saw Z 5 Ec complete with:
1 saw band, coarse 8 mm (5/16 in.), serrated
1 saw band, coarse 6 mm (15/64 in.)
1 saw band, coarse 8 mm (5/16 in.)
1 handle cpl.
1 adapter
1 operating manual
1 folder "Safety Instructions"
Sound power level
99 dB (A)
.
2
305 mm (12 in.)
205 mm (8 1/16 in.)
6 - 8 mm (15/64 – 5/16 in.)
1752 mm (69 in.)
0.65 mm (1/32 in.)
30°
1550 - 650 rpm
16.6 – 6.9 m/s (54.4 – 22.6 ft/sec)
35 mm (1 3/8 in.)
13,6 kg (29.9 lbs)
230 V~, 50 Hz
2250 W
10 A
Workplace-related emission value
88 dB (A)
-15-