2.3 Technical data
Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth 0°/30°/45°
Tilting saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Diameter extraction connection
Weight
Dimensions:
Size of the tabletop
Height of the tabletop
2.4 Noise emission specifications
The noise emission values determined according to EN 61029-1 and EN 61029-2-1 (application of the machine
as a circular saw bench with a circular saw blade provided as standard) are:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Scope of supply
Pull-push saw Erika 70 Ec complete with:
1 carbide-tipped circular saw blade Ø 225 mm (8 7/8 in.), 32 teeth
1 riving knife/splitter (thickness 2.2 mm (3/32 in.)
1 saw guard with extraction connection
1 universal stop
1 pushing rod
1 extraction hose
1 branch pipe (connection of upper and lower extraction connection)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
Feet folded
Feet unfolded
Sound power level
98 dB (A)
101 dB (A)
230 V~, 50 Hz or 110 V~, 50 Hz
2250 W or 1800 W
12.3 A - EU; 9.5 A – CH or 15 A
2100 - 4200 rpm
2100 - 4200 rpm
72/62/50 mm (2 ¾ / 2 7/16 / 2 in.)
-3° - 48°
225/210 mm (8 7/8 / 8 1/4 in.)
1.8 mm (1/16 in.)
2.5 mm (3/32 in.)
30 mm
58 mm (2 9/32 in.)
32 kg (70.4 lbs)
818 / 525 mm (32 3/16 x 20 5/8 in.)
413 mm (16 1/4 in.)
891 mm (35 1/16 in.)
Workplace-related emission value
87 dB (A)
90 dB (A)
-22-