Operation; Traktor Function Assignment; Track Deck Control - Reloop Jockey 3 REMIX Mode D'emploi

Troubleshooting
Should a problem arise and the Jockey 3's LEDs are not lit correctly, in most cases this is probably caused by installed MIDI software (e.g. MidiYoke,
Maple Virtual MIDI Cable, OSCulator, Bome Midi Translator etc.).
In order to solve the problem proceed as follows:
1. In Traktor open the adjustment dialogue by clicking the small cog wheel in the upper right corner.
2. Open the category "Controller Manager".
3. For the following device entries the following port assignments have to be configured:
devICe
Jockey 3 V* (2 Sample Decks)
Jockey 3 V* (Effects Deck A)
Jockey 3 V* (Effects Deck B)

4. Operation

After connecting and configuring Reloop Jockey 3 Remix correctly for the DJ software, Traktor 2 can now be used. If Traktor Pro 2 is being used,
it is possible to fully utilize the Jockey 3 Remix user interface. There are some limitations for Traktor LE 2 regarding effect control, the number of
usable decks and the hot cue assignment.

4.1 Traktor Function Assignment

nOTe! In the following the whole Traktor function assignment will be described. Some features are only available in Traktor Pro 2.
NOTE! To warrant ideal sample deck control another assignment on Deck C/D is necessary. For better overview all functions regarding sample
decks on your Jockey 3 Remix dispose of a blue background colour.

4.1.1 Track deck Control

nO FUnCTIOn
T1 Pitchfader
Herewith it is possible to adjust the current deck's (see -T30-) pitch.
T2 Dry/Wet Dial
With this encoder it is spossible to adjust the effect's intensity.
T3 Effect Parameter <Advanced E.>
In Advanced Effect Mode the parameters can be adjusted herewith.
Dry/Wet Fine Adjustment <Chained E.>
If Chained Effect Mode is used, the single effects can be operated.
nOTe! In Traktor Le only the 1st parameter in Chained effect Mode works.
T4 FX On Button <Advanced E.>
Activates the Advanced FX Section corresponding to the deck
T5 Effect Reset Function <Advanced E.>
In Advanced Effect Mode it is possible to reset the effect herewith.
FX B1 On <Chained E.>
Activates and deactivates the 1st effect in Chained Effect Mode respectively.
T6 Effect Button 1 <Advanced E.>
Activates and deactivates the Effect Button 1 in Advanced Effect Mode.
FX B2 On <Chained E.>
Activates and deactivates the 2nd effect in Chained Effect Mode respectively.
T7 Effect Button 2 <Advanced E.>
Activates and deactivates the Effect Button 2 in Advanced Effect Mode.
FX B3 On <Chained E.>
Activates and deactivates the 3rd effect in Chained Effect Mode.
T8 Loop Length
Turning the encoder varies a set loop's length.
Pressing the encoder sets an automatic loop with the adjusted loop length. The
loop ending point does not have to be set manually.
T9 Loop Shift
Turning the encoder shifts a set loop's position.
Pressing the encoder (de-)activates the loop-active function.
T10 Filter
Adjusts the filter effect for the active deck.
T11
Sample deck volume dial
Adjusts the assigned sample deck's volume.
T12 Pitch Bend Button -
Slows down the deck's pitch for as long as the button is being held.
T13 Pitch Bend Button +
Increases the deck's pitch for as long as the button is being held.
T14 Beat Jump Back (-4 beats)
Carries out a beat jump opposed to playback direction.
T15 Beat Jump Back (-1 beat)
Carries out a beat jump opposed to playback direction.
In-PORT
Reloop Jockey 3 Remix
Reloop Jockey 3 Remix
Reloop Jockey 3 Remix
FUnCTIOn WITH ACTIvATed SHIFT -T23-
Effekt Change <Advanced E.>
If the Advanced Effect section is selected, it is possible to change the effect by
turning the encoder.
Effect Change <Chained E.>
In Chained Effect Mode it is herewith possible to change the respective effect.
nOTe! In Traktor Le only the 1st effect from the effect section works.
Fx Preset 1 Button consists of:
Beat Masher 2
Digital LoFi
Reverse Gain
Fx Preset 2 Button consists of:
Beat Masher 2
Filter
Flanger Pulse
Fx Preset 3 Button consists of:
Beat Masher 2
Reverb
Reverse Gain
Fx Preset 4 Button consists of:
Delay
Filter
Reverb
Key Controller
Herewith the selected deck's key can be adjusted.
Beat Jump Back (-16 beats)
Carries out a beat jump opposed to playback direction.
Loop-In/Set Cue Button
Manually sets loop beginning point. Simultaneously a cue point is defined.
OUT-PORT
Reloop Jockey 3 Remix
Reloop Jockey 3 Remix
Reloop Jockey 3 Remix
25