Initial Operation; Computer Configuration; Asio Driver Installation - Reloop terminal mix 4 Mode D'emploi

2. iniTiAl OPeRATiOn

First turn off the device via the On/Off Button -B44- on the rear panel.
Then connect the included USB cable to the connection -B45- on the device's rear panel and a free USB port of your computer.

3. COMPUTeR COnFigURATiOn

It is necessary to install a driver to guarantee a flawless operation under Windows. Under Mac OSX a driver installation is not necessary.
Moreover, make sure that all other programs are closed. Please especially observe the following items.

3.1 AsiO driver installation

Insert the included installation CD into your drive. In the folder "Drivers" select the included ASIO driver and start the installation via a double
click.
TiP! Reloop regularly provides drivers online. For more information please see the chapter "Updates & support".
nOTe! Please make sure to carry out the driver installation with admin rights. Otherwise the installation may fail with an error message.
When using Windows Vista or Windows 7 resepectively, carry out the installation setup by right-clicking followed by the selection "Carry out as
administrator".
22
1. Make sure that all other programs are closed and click "Next>".
2. Now please carefully read the license agreement and accept it by clicking "I agree".
3. Select the installation path where you wish to install the driver and then click on "Install".
4. The installation will now be carried out. After end of installation click on "Finish". A reboot is not
necessary.