Routing Functions; Microphone - Reloop Jockey 3 REMIX Mode D'emploi

4.2 Routing Functions

The Jockey 3 Remix disposes of various routing options in order to include already existing equipment.

4.2.1 Microphone

On the device's front panel a microphone can be included via a 6.3 mm jack -F45-. Besides a volume dial -F46- there is also a Routing Switch
-F47- that operates the following routing options:
SW = The microphone's signal is routed to the software. For this function a free deck for the mic signal is necessary. In Traktor Pro 2 it is
additionally necessary to configure the input, as described below:
First it is necessary to select the correct inputs for the respective deck. In this example deck C is used as microphone channel.
In order to make the signal become audible via master, the deck has to be switched to Live Input.
By using this routing option the mic signal can be enhanced with Traktor's internal effects.
Thru = The mic's signal is directly routed to the master output. With this variant a signal in the software is not necessary, thus becoming es-
pecially adequate for Traktor LE users or when using four decks in Traktor Pro.
Off = The mic becomes mute.
28