Midi-Zuweisungstabelle - Reloop Jockey 3 REMIX Mode D'emploi

7.2. MIDI-zuweisungstabelle

sw naMe
TRAX
DRY/WET/FX SEL
PARAM 1/FX SEL
PARAM 2/FX SEL
PARAM 2/FX SEL
SIZE/SET
MOVE/ACT
SIZE/SET(Remix Mode)
MOVE/ACT(Remix Mode)
JOG (Scratch)
JOG (Search)
JOG
Remix Jog(Scratch)
Remix Jog(Search)
Remix Jog
PITCH(Remix Mode)
PITCH
GAIN
HIGH
MID
LOW
CH FADER
CH FADER(Remix Mode)
FILTER/KEY
SAMPLE DECK C VOL
CUEMIX FADER
CROSSFADER
CF CUREV
FX ON
FX B1
FX B2
FX B3
-4 BEAT
-1 BEAT
+1 BEAT
+4 BEAT
ROLL
MASH
1
2
3
4
1(ROLL)
2(ROLL)
3(ROLL)
4(ROLL)
1(MASH)
2(MASH)
3(MASH)
4(MASH)
SAMPLE MODE
REMIX MODE
FX1(Search)
FX2(Scratch)
MASTER
KEYLOCK(KEY)
FX MODE(FX ON)
TAP(CUE)
LOAD
FADERSTART
SHIFT(DEL)
PITCH BEND -
PITCH BEND +
A
C
IN1
IN2
D
B
DRY/WET/FX SEL
PARAM 1/FX SEL
PARAM 2/FX SEL
PARAM 3/FX SEL
Level meter L
Level meter R
16
TyPe MIDI MIDI2(shIfT)
SW/ENC 35/35 74/74
SW/ENC/VR/LED 1D/--/1D/1D 5C/5C/--/5C
SW/ENC/VR/LED 1E/--/1E/1E 5D/5D/--/5D
SW/ENC/VR/LED 1F/--/1F/1F 5E/5E/--/5E
SW/ENC/VR/LED 20/--/20/20 5F/5F/--/5F
SW/ENC 2B/2B 6A/6A
SW/ENC 2C/2C 6B/6B
SW/ENC 2D/2D 6C/6C
SW/ENC 2E/2E 6D/6D
SW/ENC 22/22 61/61
SW/ENC 26/26 65/65
SW/ENC 28/28 67 /67
SW/ENC 25/25 64/64
SW/ENC 37 /02 76/41
SW/ENC 38/01 77 /40
VR/CENTER 39/39 78/78
PITCHBEND PITCHBEND --
VR/Low 79/79 --
VR/Low 7A/7A --
VR/Low 7B/7B --
VR/Low 7C/7C --
VR/Low/
31/31/27 --
Faderstart
VR 70 --
VR/CENTER 32/32 71/71
VR 33 72
VR 36 --
VR 37 --
VR 38 --
SW/LED 01/01 40/40
SW/LED 02/02 41/41
SW/LED 03/03 42/42
SW/LED 04/04 43/43
SW/LED/FLSH 05/05/30 44/44/6F
SW/LED/FLSH 06/06/53 45/45/67
SW/LED/FLSH 07 /07 /49 46/46/66
SW/LED/FLSH 08/08/48 47 /47 /60
SW/LED 09/-- --/--
SW/LED 0A/-- --/--
SW/LED 0B/0B 4A/4A
SW/LED 0C/0C 4B/4B
SW/LED 0D/0D 4C/4C
SW/LED 0E/0E 4D/4D
SW/LED 0F/0F --
SW/LED 10/10 --
SW/LED 11/11 --
SW/LED 12/12 --
SW/SW2/SW3/LED 23/62/4E/23 --
SW/SW2/SW3/LED 24/63/4F/24 --
SW/SW2/SW3/LED 33/72/50/33 --
SW/SW2/SW3/LED 36/73/51/36 --
SW/LED 13/13 52/52
SW/LED 14/-- --/--
SW/LED 15/-- 54/54
SW/LED 16/-- 55/55
SW/LED 17 /17 56/56
SW/LED 18/18 57 /57
SW/LED 19/19 58/58
SW/LED 1A/1A 59/59
SW/LED 1B/1B 5A/1B
SW/LED 1C/1C 5B/--
SW 34 --
SW 29 68
SW 2A 69
SW 3B --
SW 3C --
SW 3A --
SW 3D --
SW 3F --
SW 3E --
LED .. 5C
LED .. 5D
LED .. 5E
LED .. 5F
LEVEL 21 --
LEVEL 09 --
cc-aBsoluTe (vR)
ReMaRks
Control Change messages are sent
with status 0xBn, where n is the
CH1 Only
channel, for the specified CC con-
LED:0~7F(0~127) MIDI2 Only DeckC/D
troller. Thus the controller MIDI ID
LED:0~7F(0~127) MIDI2 Only DeckC/D
is indicated with the channel along
with the CC number. The value from
LED:0~7F(0~127) MIDI2 Only DeckC/D
0x00 to 0x7F, directly related to
LED:0~7F(0~127) MIDI2 Only DeckC/D
the location of the controller.
cc-RelaTIve (enc)
Control Change messages are sta-
CH1 Only
tus 0xBn, where n is the channel,
CH1 Only
for the specified CC controller.
Thus the controller MIDI ID is
Scratch ON
indicated with the channel along
Search ON
with the CC number. The value from
0x40 to indicate the change in the
controller. This is an offset to 0x40
Scratch ON & Remix ON(DeckA/B only)
"one's complement" notation.
Search ON & Remix ON(DeckA/B only)
Remix ON(DeckA/B only)
A message with data 0x43 indica-
tes a positive change of 3.
A messages with data 0x31 indica-
tes a negative change of 15.
SWITCH ON/OFF (Low,Faderstart,
sw,cenTeR,cw,ccw)
These messages are used for
switches.
Low/Faderstart:Shift+Mon Cue (LED on)
Control Change messages are sent
with status 0x9n, SWITCH On and
Off value are 0x7F and 0x00, where
n is the channel.
DeckC/DeckD only
CH1 Only
LED ON/OFF (LED)
CH1 Only
These messages are used for LED.
CH1 Only
Control Change messages are sent
with status 0x9n, LED On and Off
value are 0x7F and 0x00, where n
is the channel.
PITchBenD
Pitchbend messages are status
0xEn, where n is the channel, for
the specified controller.
Thus the controller ID is indicated
only by the channel.
For accurate changes, the 14 bit
data in a pitch bend message is
reserved for absolute controllers
which require more than 7 bits
of data.
level leD (level)
These messages are used for
LED: 0~7F(0~127) *2
LEVEL.
LED: 0~7F(0~127) *2
LED: 0~7F(0~127) *2 Control Change messages are sent
with status 0x9n, LED Off value
LED: 0~7F(0~127) *2
is 0x00 and On value is related to
LED: 0~7F(0~127) *2
LED amount, 0x01 with one LED,
LED: 0~7F(0~127) *2 0x02 with two LED...., where n is
the channel.
LED: 0~7F(0~127) *2
LED: 0~7F(0~127) *2
*1 LED RINGS CODE
00~08 => 0
LED& Non-Shift SW/LED -> MIDI Preset 2
09~17
18~26
27~35 => 27
117~127 => 117
*2
0 > 42
43 > 85 =
86 > 127 =
CH1 Only
CH1 Only
CH1 Only
CH1 Only
CH1 Only
CH1 Only
0~7F(0~127) *1
0~7F(0~127) *1
0~7F(0~127) *1
0~7F(0~127) *1
CH1 Only 0~A(0~10)
CH1 Only 0~A(0~10)
=> ALL LED OFF
=> 9 => 1 LED ON
=> 18 => 2 LEDS ON
=> 3 LEDS ON
=> ALL LEDS ON
= Blue + Red (violet)
Blue
Red