Initial Operation - Reloop Jockey 3 REMIX Mode D'emploi

Rear Side
B54
B55 B56
nO deSIGnATIOn
B54 Mains Cord Strain Relief
B55 Mains Adapter Connection (DC 6V/2.0A)
B56 ON/OFF Switch
B57 USB Port
B58 Jog Wheel Sensitivity
B59 LED Dimmer
B60 Shift Lock Switch
B61 3.5 mm Jack Master-Thru Output
B62 6.3 mm jack Master 1 Audio Output (balanced)
B63 RCA Master 2 Audio Output
B64 RCA Booth Audio Output
B65 Line/Phono Switch
B66 RCA Input 2
B67 RCA Input 1
B68 Grounding Screw
Front Side
F46
F45 F47
nO deSIGnATIOn
F45 6.3 mm Jack Microphone Connection
F46 Microphone Volume
F47 Microphone Routing Switch
F48 Crossfader Curve
F49 Input 1 Routing Switch
F50 Input 2 Routing Switch
F51 6.3 mm Jack Headphones Connection
F52 3.5 mm Jack Headphones Connection
F53 Master Thru Routing Switch
Lateral view
S69
nO deSIGnATIOn
S69 Jog Wheel Drag
S70 Kensington Lock

2. Initial Operation

First make sure to turn off the device via the ON/OFF Button -B56- on the rear panel.
Connect the included mains adapter to the device's DC jack -B55- and a shock-proof outlet.
Then connect the included USB cable to the corresponding connection -B57- on the device's rear panel and a free USB port of your computer.
B58 B59 B61
B57 B60
B65
B62 B63 B64
F48 F49 F50
S70
B68
B65
B66 B67
F51 F52 F53
21