5
Technical Information
Pin Functions
After the "enter", the continuous report mode stops immediately.
According to the report type and mode, the unit sends one
instantaneous report each time a "Request Report" (RR) command is
received.
To return in the continuous report mode it is necessary to send a
new "Report Setting" (RT) command with time rate ≠ 0.
After the "enter" the continuous report mode starts immediately.
Enable - Disable Input ECO Characters
By default, the unit transmits the ECO of all characters received from
the host.
If required, It is possible to disable this feature.
See the command "Enable, Disable Receiving Input ECO" to do this.
The ECO of input characters may be used to understand that the
physical communication between the unit and host is good so,
disabling the ECO this feature is lost.
Ion Pumps Control Unit (No Battery) User Manual / 87-900-123-01 (B)
91/106