Operation - Alutech LG-600F-868 Manuel D'installation Et D'utilisation

OPERATION

• Check the ability of the drive to identify the interaction with foreign objects during closing.
Put a 50 mm high obstacle on the floor. When the door contacts the obstacle during door
closing, the drive should stop the door and open completely. If required, adjust the force
(section 6 'Adjustment').
Commissioning of the drive system can be done only after successful completion of tests. Partial com-
missioning or temporary operation are forbidden.
Commissioning requires the installer to:
• prepare and keep technical documentation for the automation set. The documentation
shall include: general drawing, circuit layout, assembly and operation manual, as well as
maintenance schedule.
• Fasten a permanent sticker or a sign next to the door with the description of unblocking
and manual opening of the door.
• Fasten a permanent safety sticker next to the door in a visible place, containing the
instruction with the following meaning: 'Attention! Automatic drive. Do not stand close to
the door because of the possibility of unexpected activation. Children are not allowed
to stand near the door during its movement' .
• Fasten next to the door or to the fixed control units in a visible place, stickers with a
warning about possible jamming with the following meaning: 'Attention! Jamming risk!
Regularly check and regulate, if necessary, so that in case of contact of the door leaf with a
50 mm high object, placed on the floor, the direction of the leaf movement changed to the
opposite direction, or such subject could be freed' .
• Pass the filled 'Assembly and operation manual' to the user (owner).
• Prepare the 'Maintenance schedule' and give it to the user (owner).
Instruct about maintenance rules.
• Instruct the owner about the existing hazards and risks, and inform about safe operation
rules. Explain to the owner the need to inform the persons operating the door about the
existing hazards and risks, and about safe operation rules.
8. OPERATION
Y
The product shall not be used by children or persons with limited physical, sensory or mental
abilities, as well as persons with insufficient experience and knowledge.
Do not let children play with control elements. Remote controls shall be stored in areas, un-
reachable by children.
Do not touch moving door or moving parts.
Before starting movement of the door make sure, that no people, animals, vehicles or objects
are in the danger area of the door. Monitor door movement. Passage of people and vehicles
through the moving door is prohibited.
Be careful when using manual unblocking of the door, as an open unblocked door can fall quickly
because of many factors such as slack or broken springs, or the door being poorly balanced.
Check the operation of safety devices every month.
Regularly check the drive system. In particular, check cables, springs and mounting hardware,
for the signs of wear, damage or imbalance. It is prohibited to use a door requiring repair or
adjustment, as the mounting defect or incorrect balance of the door may result in injury or
product failure.
Perform scheduled maintenance of the drive system to ensure efficient and safe operation.
Scheduled maintenance shall strictly comply with the existing regulatory documents, instructions
28
LEVIGATO DRIVES (LG SERIES) | LEVIGATO ANTRIEBE (SERIE LG) | COMMANDES LEVIGATO (SERIE LG)