Alutech LG-600F-868 Manuel D'installation Et D'utilisation page 25

Masquer les pouces Voir aussi pour LG-600F-868:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADjUSTMENT
Using
and
select program 'P2' on the
13.2
menu
13.3 Press
Using
and
select function 'F9' on the
13.4
menu
13.5 Press
The display will automatically
show the number of the first
13.6
remote control in the drive
memory
Using
and
select the number of the
13.7
remote control to be removed
Press
. A dot will
disappear from the display.
In three seconds the display
will show the next number
of the remote control in the
13.8
memory.
To exit the programming
mode press
for 15 seconds
14
P2–F0—Delete all remote controls
Press and hold
about 5 secs to enter the
14.1
programming mode
Using
and
select program 'P2' on the
14.2
menu
14.3 Press
Using
and
select function 'F0' on the
14.4
menu
14.5 Press
LEVIGATO DRIVES (LG SERIES)
or wait
for
|
LEVIGATO ANTRIEBE (SERIE LG)
The display will show
14.6
symbols '- -'
Press
and hold it for
14.7
~ 5 secs until a dot appears on
the display
To exit the programming
14.8
mode press
for 15 seconds
To recort the remote control again or record another button,
you should delete the remote control first.
P3—OPERATING MODE
P3–F1—Automatic mode
15
The control is performed by means of short
presses on the control button
Enter the programming mode
(similar to items 1.1–1.5 from
15.1
Table 6). Select program 'P3'
and function 'F1'
'on.'—automatic mode is on;
'no.'—automatic mode is off.
ATTENTION!
15.2
Activation of the automatic
mode turns off the manual
mode (s. 16).
Default value—'on.'
P3–F2—Manual mode
Control is performed by means of holding the
control button in the pressed state; remote
controls are disconnected.
16
Note: this mode may be required for example,
when safety measures require manual control
of the door to ensure safe operation during
movement
Enter the programming mode
(similar to items 1.1–1.5 from
16.1
Table 6). Select program 'P3'
and function 'F2'
'on.'—manual mode is on;
'no.'—manual mode is off.
ATTENTION!
16.2
Activation of the manual
mode turns off the automatic
mode (s. 15).
Default value—'on.'
|
COMMANDES LEVIGATO (SERIE LG)
or wait
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lg-800-868Lg-1000f-868Lg-1200-868Levigato lg serie

Table des Matières