Coolant Fitting, Liquid- Or Solid-Phase Synthesis; Coolant Connector, Condensation Zone; Coolant Fitting, Conditioning Zone For Reactions Below Room Temperature; Multiple-Evaporator - Heidolph Synthesis 1 Mode D'emploi

E
3.

Coolant fitting, liquid- or solid-phase synthesis

nipple, coolant IN,
condensation zone
nipple, heater zone, IN
3.1

Coolant connector, condensation zone

Use high-flexible tube (6 - 8 mm ID). Secure with tube clamps.
Do not impede shaking motion (orbit) of the reaction block by coolant
tubes.
3.2 Coolant fitting, conditioning zone for reactions below room
temperature.
Use high-flexible tube (6 - 8 mm ID). Insulate coolant tube when working below
freezing point. Secure with tube clamps.
Do not impede shaking motion (orbit) of the reaction block by coolant
tubes
4.

Multiple-Evaporator

4.1

Reaction vessels

refer to Chapter 1.1 liquid-phase synthesis
4.2

Locate reaction vessels in heater block

refer to Chapter 1.2 liquid-phase synthesis
80
nipple, coolant return,
condensation zone
nipple, heater zone, OUT