Selecting 12H/24H Display - Conrad W224-7 Mode D'emploi

• Briefly press the button "CLOCK"; the minutes of the time flash.
Set the minutes with the buttons "+/
• Briefly press the button "CLOCK"; the year flashes in the display. Set the year with the
buttons "+/ " and "-/ZONE".
• Briefly press the button "CLOCK"; the display format for date and month flash (order of date
and month in the display).
Switch between date/month and month/date display with the buttons "+/
• Briefly press the button "CLOCK"; the month flashes. Set the month with the buttons "+/
and "-/ZONE".
• Briefly press the button "CLOCK"; the date flashes. Set the date with the buttons "+/
"-/ZONE".
• Briefly press the button "CLOCK"; the weather forecast symbols now flash at the top of the
display.
Select the current weather situation with the buttons "+/
• Briefly press the button "CLOCK"; you will leave setting mode and all settings will be stored.

Setting mode is also terminated automatically if you do not press any button for
approx. 1 minute. Previously made settings are also stored.
c) Selecting 12h/24h Display

Proceed as described in chapter 11. b).
The DCF reception is, however, switched off automatically.
After leaving setting mode, DCF reception therefore has to be switched on again.
Briefly press the button "+/
" and "-/ZONE".
"; observe chapter 11. a).
" and "-/ZONE".
" and "-/ZONE".
"
" and
47