Sonoro sonoroHIFI SO-510 Mode D'emploi page 91

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Switch display date on/off
Prerequisite: The device is in standby mode.
1.
Press
or
ð The display shows the „Set Time" setting.
2.
Turn
until the display shows the „Display
Date" setting.
3.
Press
.
ð You are now in the „Display Date" setting.
4.
To activate the date display: Turn
display reads „On" .
To deactivate the date display: Turn
the display reads „Off" .
5.
Press
to confirm your selection.
ð The date display is activated/deactivated.
Time format
Prerequisite: The device is on.
1.
Press
or
ð The display shows the „Bass" setting.
2.
Turn
until the display shows „Settings" .
3.
Press
.
ð You are now in the „Settings" menu. The
display shows the „Time Format" setting.
4.
Press
again.
5.
Turn
to select the time format you want to
use. You can choose from the following formats:
n 12‐hour format
n 24‐hour format
i
In 12‐hour format, the time display is fol‐
lowed by either „AM" (for the 1st half of the
day) or „PM" (for the 2nd half of the day).
6.
Press
to confirm your selection.
ð The time format is set.
© sonoro audio GmbH 2016
.
until the
until
.
Date format
Prerequisite: The device is on.
1.
Press
or
ð The display shows the „Bass" setting.
2.
Turn
until the display shows „Settings" .
3.
Press
.
ð You are now in the „Settings" menu. The
display shows the „Time Format" setting.
4.
Turn
until the display shows the „Date
Format" setting.
5.
Press
again.
ð You are now in the „Date Format" setting.
6.
Turn
to select the date format you want to
use.
You can choose from the following formats:
n Weekday, day, month, year.
n Weekday, month, day, year
n Weekday, month (in words), day, year
7.
Press
to confirm your selection.
ð The date format is set.
Setting the automatic time/date update function
Switching on the automatic time/date update func-
tion automatically synchronizes the time and date in
the FM radio and DAB radio operating modes.
Prerequisite: The device is on.
1.
Press
or
ð The display shows the „Bass" setting.
2.
Turn
until the display shows „Settings" .
3.
Press
.
ð You are now in the „Settings" menu. The
display shows the „Time Format" setting.
4.
Turn
until the display shows the „Set
Time" setting.
.
.
91

Publicité

Table des Matières
loading

Table des Matières