Selecting An Audio Source; Radio Playback - Sonoro sonoroHIFI SO-510 Mode D'emploi

Activating the equaliser effect using the remote con‐
trol
Prerequisite: The device is on.
1. Press .
2. Press
desired equaliser effect.
3. Press to confirm your selection.
ð The display shows the selected equaliser
effect and the word „On" . The equaliser
effect is activated.
Deactivating the equaliser effect
Prerequisite: The device is on.
1. To deactivate your selection and switch off the
equaliser effect, go to the „Equalizer
Effect" setting and press
ð The display shows the equaliser effect and
the text „Off" . The equaliser effect is deacti-
vated.
5.3

Selecting an audio source

The sonoroHIFI allows you to play back radio and
audio data from a variety of media. You can choose
from the following sources:
n Radio (FM, DAB)
n CD
n Bluetooth
n AUX IN 1 or AUX IN 2
n Optical In
94
or and to set the
or again.
Selecting an audio source
Prerequisite: The device is on.
1. Press repeatedly until the source you
want to use is displayed.
Alternatively:
Press the button for the source you want to use
on the remote control.
FM mode
n
DAB mode
n
CD mode
n
Bluetooth mode
n
AUX mode
n
Optical in mode
n
ð The display shows the selected source.
2. Press or to confirm your selection.
ð Audio playback will start automatically.
5.3.1

Radio playback

The sonoroHIFI allows you to listen to both FM and
DAB radio.
Switching on radio mode
1. Press repeatedly until the display
shows „FM Radio" or „DAB Radio" .
Press or to confirm your selection.
2.
Alternatively:
Briefly press
ð Radio mode is on. The display shows „FM
Radio" or „DAB Radio" , and the corre-
sponding symbol (Fig. 19/1) lights up
on the top half of the display.
or .
© sonoro audio GmbH 2016