4.10 Setting The Display Language; Resetting The Device To The Factory Settings - Sonoro sonoroHIFI SO-510 Mode D'emploi

5. Press again.
ð You are now in the „Clock Update" setting.
6. To activate the automatic time/date display:
Turn until the display reads „Auto Clock" .
To deactivate the automatic time/date display:
Turn until the display reads „Manual
Clock" .
7. Press to confirm your selection.
ð The automatic time/date update function is
set.

4.10 Setting the display language

You can set the language for the menu and the play-
back display.
Prerequisite: The device is on.
1. Press or
ð The display shows the „Bass" setting.
2. Turn until the display shows „Settings" .
3. Press .
ð You are now in the „Settings" menu. The
display shows the „Time Format" setting.
4. Turn until the display shows the
„Language" setting.
5. Press again.
ð You are now in the „Language" setting.
6. Turn to set the desired language. You can
choose from the following display languages:
n German
n French
n English
7. Press to confirm your selection.
ð The display language is set.
4.11 Resetting the device to the factory set‐
tings
If necessary, you can reset all the settings you have
altered, such as language, time format and saved sta-
tions, to the factory settings.
92
.
Prerequisite: The device is on.
1. Press the or
ð The display shows the „Bass" setting.
2. Turn until the display shows „Settings" .
3. Press to go to the „Settings" menu.
ð The display shows the „Time Format" set-
ting.
4. Turn until the display shows the „Reset"
setting.
5. Press to go to the „Reset" setting.
6. Turn until the display shows the „System
Reset" setting.
7. Press to confirm your selection.
ð The device is reset to the factory settings.
button.
© sonoro audio GmbH 2016