Sonoro sonoroHIFI SO-510 Mode D'emploi page 100

Switching on Bluetooth mode
Prerequisite: The device is on.
1. Press until the display shows
„Bluetooth" .
Press or to confirm your selection.
2.
Alternatively:
Briefly press .
ð Bluetooth mode is now active. The display
shows „Searching" , and the
flashes on the top half of the display.
Pairing Bluetooth devices
i
Refer to the manual of your external device for
help.
Prerequisites:
n The device is in Bluetooth mode.
n Bluetooth is activated on the external device (e.g.
mobile phone).
1. Follow the instructions in the external device's
manual to pair it with the sonoroHIFI via Blue-
tooth.
ð After pairing, the display shows the
„Bluetooth" text.
Controlling playback in Bluetooth mode
Prerequisite: An external device is connected to the
sonoroHIFI via Bluetooth.
1. Follow the instructions in the external device's
manual to start playback.
100
2.
symbol
Deleting connected devices
Prerequisite: The device is in Bluetooth mode.
1.
i
The buttons on the sonoroHIFI and its remote
control will can be used to control some of
the functions on the external device.
You can control playback in Bluetooth mode
using the relevant buttons on the remote con-
trol or the device itself. The following buttons
are active in Bluetooth mode:
/ „Play/Pause" = start playback;
n
pause playback; resume playback.
/ „Skip forwards" = skip to next track
n
(brief press); fast forward through current
track (press and hold).
/ „Skip backwards" = skip to previous
n
track (brief press); rewind through current
track (press and hold).
„Stop" = switching music track information
n
if it is available.
Press and hold to disconnect the Bluetooth
pairing and delete the external device.
i
The device can store up to 8 pairings with
external Bluetooth devices. When it is paired
with a 9th external device, the external
device in the first storage space is automati‐
cally deleted.
© sonoro audio GmbH 2016