Publicité
Les langues disponibles
Les langues disponibles
EasyGlider PRO + electric BlueEdition
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you are
completely satisfied with the contents of your kit. However, we would ask you to check all the parts (referring to the Parts List) before
you start construction, as we cannot exchange components which you have already worked on. If you find any part is not
acceptable for any reason, we will gladly correct the defect or replace the item in question once we have inspected it. Please send the
part to our Model Department, being sure to include the purchase receipt and a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in terms
of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we cannot
entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely
requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at the
flying field. Errors and carelessness in building and flying the model can result in serious personal injury and damage to
property. Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we
are obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Additional items required for the EasyGlider PRO:
Adhesive:
Use medium-viscosity cyano-acrylate glue ("cyano" - not styrofoam cyano) Zacki ELAPOR # 85 2727 for this model.
Epoxy adhesives produce what initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away
from the parts under load. Hot-melt glue (from a glue gun) is a useful alternative adhesive.
MULTIPLEX radio control system components for EasyGlider PRO:
RX-5 light M-Link receiver
or
RX-5 M-Link receiver (telemetriy capable)
Tiny-S servo (2x required)
Nano-S servo (2x required)
or
Tuning-servo Tiny-MG (2x required)
Tuning-servo Nano-PRO MG (2x required)
Extension lead 400 mm UNI (2x required)
Extension lead 300 mm UNI (2x required)
Battery charger:
MULTIcharger L-703 EQU 230V
or
Combo MULTIcharger LN-3008 EQU w. mains PSU, AC/DC 230V/12V 5,0A
EasyGlider PRO power set
Power set "EasyGlider PRO 3S STANDARD" Li-BATT powered
Power set "EasyGlider PRO 3S STANDARD"
EasyGlider PRO tuning power set
Power set "EasyGlider PRO 3S TUNING" Li-BATT powered
Power set "EasyGlider PRO 3S TUNING"
Flight battery
Li-BATT eco 3/1-2000 (M6)
Li-BATT eco 3/1-3000 (M6)
Additional items required for the glider variant only
NiMH receiver battery,
Mini switch harness with charge socket
Aero-tow release
Tools:
Scissors, balsa knife, side-cutters.
Note: remove the illustration pages from the centre of the building instructions.
Specification:
Wingspan
Overall length
All-up weight
Wing area, FAI
Wing loading
RC functions
Glider
1800 mm
1130 mm
approx. 800 g
approx. 41.6 dm²
approx. 20 g / dm²
Elevator, rudder, aileron
GB
Elevator / rudder
aileron
Elevator / rudder
aileron
Aileron servo
Aileron servo
2000 mAh
3000 mAh
4 / 2100 mAh
Electric glider
1800 mm
1130 mm
with standard power system approx. 980 g
FAI approx. 41.6 dm²
approx. 24 g / dm²
as glider, plus throttle
Order No.
5 5808
Order No.
5 5817
Order No.
6 5121
Order No.
6 5120
Order No.
6 5122
Order No.
6 5119
Order No.
8 5029
Order No.
8 5031
Order No.
9 2523
Order No.
9 2545
Order No.
33 3651
Order No.
33 2651
Order No.
33 3650
Order No.
33 2650
Order No.
15 7231
Order No.
15 7236
Order No.
15 6052
Order No.
8 5045
Order No.
72 3470
11
Publicité
