Publicité
Les langues disponibles
Les langues disponibles
Additional pack contents
15. Wing joiner for sport wing panels
16. Left-hand Sport wing panel (excl. aileron servo and linkage).
17. Right-hand Sport wing panel (excl. aileron servo and linkage).
The kit also includes operating instructions for the receiver and speed controller, and
safety notes for LiPo batteries; these are not shown in the photos.
The illustration shows the components of the Sport wing.
Essential accessories (not included)
Graupner MX-12 HoTT computer system
QUICK 70 LiPo battery charger
G 3.5 charge lead
UHU thread-lock fluid
Assembling the model
The model requires just a few simple procedures to complete, but the following in-
structions must still be observed carefully to ensure that the model flies safely.
The first step is to install the undercarriage. Centre the rudder and elevator servos
using a servo tester or your radio control system.
Attention: the noseleg retaining screw (9) must be secured with a drop of UHU
thread-lock fluid, and the screw must engage squarely on the machined 'flat' in
the noseleg (9). Tighten the retaining screw firmly.
GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
No. 33112
No. 64070
No. 2970.L
No. 952
3
08/2014
Publicité
