Description Of The Appliance; Identification; Coupling With Heat Pumps - AERMEC KFC Manuel D'installation

1.3.

DESCRIPTION OF THE APPLIANCE

Passive cooling or freecooling is the
direct method of use of the chilling
energy available in the sub-surface for
summer air conditioning. Every AERMEC
heat pump is set-up to manage the
appliance, one heat exchanger and
an electrically-actuated
located in a painted panel and which
must be connected hydraulically and
electrically to the heat pump. Every size
envisions a specific module.
1.4.

IDENTIFICATION

The appliance can be identified via
the technical plate positioned on the
appliance as indicated in the figure:
!
Tampering,
of the Technical Plate or other does
not allow the safe identification of the
product and will make any installation
or maintenance operation
performed difficult.
1.5.

COUPLING WITH HEAT PUMPS

The appliances are
coupling with AERMEC heat pumps with
different potentials.
16
KFC_5890966 _00
diverter
removal, lack
to be
designed for
2
1 Heat exchanger
2 Diverter valve
Modello Type
Matricola unità Unit se ries
C odice C ode
Anno di cost ruzione Ma nufactu red Year
P eso di t raspo rto Shipping weight
P eso di
Ope rating weight
funzionamen to
C apacità accu mulo Tank capaci ty
C apacità vaso Expansion tank
di espansione capaci ty
P ressione massima Maxi mum ope rating
di ese rcizio pressu re
P reca rica vaso Expansion tank
di espansione pre-loading p res s .
Taratura valvola Maxi mum ope rating
di sicu rezza pressu re
1