Technical Specifications; Instructions For Use - Grillo HWT 550 TILT Mode D'emploi Et Maintenance

TRIMMER HWT 550 TILT
STRING BUSH-CUTTER

Technical specifications

ENGINE: HONDA GCV 160 OHC.
STARTER: recoil starter.
CUTTING HEIGHT: 0-20-35-50 mm.
CUTTING HEAD: 6° laterally reclining, (3 positions: right, left and central).
CUTTING WIDTH: 600 mm.
WHEELS: 16" fitted on bearings.
WHEELS AXLE: adjustable.
WEIGHT: 43 kg.
TRIMMER HWT 600 WD
STRING BUSH-CUTTER
Technical specifications
ENGINE: HONDA GCV 160 OHC, 4-stroke petrol.
STARTER: recoil starter.
GEARBOX: mechanical one-speed.
CLUTCH: oil-immersed, multi-plate type.
SPEED: 3 km/h.
CUTTING HEIGHT: 0-20-35-50 mm.
CUTTING WIDTH: 600 mm
WHEELS: 16'' driving.
AXLE WHEELS: fixed.
WEIGHT: 42 kg.
PUTTING THE MACHINE INTO SERVICE
In order to put the machine into service, follow these instructions:
1. Check that the machine has not been damaged during transport.
2. Fit the two wheels and fix them with the two bushings.
3. Fit the front grass protection.
4. Fit the handlebars.
5. In the 550 TILT version, fit the cutting head inclination control rod.
6. Pour in engine oil (see engine manual).
7. Fill up the petrol tank.

INSTRUCTIONS FOR USE

7