Recessing Installation; Preparing Appliance; Minimum Clearance To Combustibles; Framing - Napoleon EFL100 Instructions D'installation Et D'utilisation

3.3

RECESSING INSTALLATION

Due to the many different fi nish materials used on walls, it is highly recommended that you consult your local
builder before you install this appliance in the wall.
Select a location that is not prone to moisture and is located at least 36" (914.4mm) away from combustible
materials such as curtain drapes, furniture, bedding, paper etc.

3.3.1 PREPARING APPLIANCE

Cover the four holes using the cover plate supplied in the manual bag, refer to Figure 1.
COVER PLATE

3.3.2 MINIMUM CLEARANCE TO COMBUSTIBLES

3.3.3 FRAMING

D
NON-LOAD
BEARING
Measurements are taken from the body.
Sides, back and top
Finishing Material
E
BACK VIEW
0"
Fig. 1
D
E
W415-1140 / A / 07.04.13
9
EN