Installing The Appliance Onto The Wall - Napoleon Allure Phantom Serie Manuel D'installation Et D'opération

installation
EN
3.4

installing the appliance onto the wall

Due to the many different materials used on different walls, it is highly recom-
mended to consult your local builder before installing this appliance on the
wall.
Select a location that is not prone to moisture and is located at
A.
least 36" (91.4cm) away from combustible materials such as curtain
drapes, furniture, bedding, paper, etc.
Have 2 people hold the appliance against the wall to determine the
B.
final location.
Place appliance face down on a soft, non abrasive surface. Remove
C.
the bracket from the back of the appliance by removing the screws (see illustrations below).
Mark out location, then mount the bracket(s) onto the wall using the supplied screws. This bracket MUST
D.
have the hooks facing upward and be level.
note:
It is strongly recommended that the mounting bracket be screwed into the wall studs where possible. If
the wall studs cannot be used, ensure that the supplied plastic anchors are used to affix the bracket to
the wall and the bracket is adequately secured.
With the wall mounting bracket
E.
installed, have 2 people lift the
appliance up and insert the 2
hooks on the bracket into the 2
slots on the back of the appliance.
Check the appliance for stability
F.
ensuring that the bracket will not
pull free from the wall.
12
W415-2172 / D / 10.30.20
HOOK
NEFL42/50FH-MT BRACKET ILLUSTRATED
NEFL60FH-MT BRACKET ILLUSTRATED
BODY
MESH TRIM
SIDE VIEW
SCREWS
21 5/8"
550mm
HOOK