Telecom Behnke a Serie Manuel page 80

Manual Door intercom devices a / b series 20 / 30 / 40 / 50 / 20-0028A/-0028B
GB GB
Configurations and Set-up
Code Parameter
** 0
*#
** **
** *0
** *1
With version 1.34 or later:
*4** 1
*4** 2
*4* x y
*5* x y
*5** x
*6* 0
*6* x mm direct call button x (x=1..9) activate after mm (mm=00..99)
*74
*75
*76
*77
Speed dialling key: Default: cf. text
300 Speed dial
301 Speed dial
:
399 Speed dial
Advanced configurations: Default setting: 0
900 0 = disabled
1 = enabled
The following configuration may only be adjusted with enabled extended
configuration.
80
Hotline function
Flash function
stop dialling
Mute off
Mute on
in case relay 1 is activated
in case relay 2 is activated
check a variable (condition) (x=0..9, y=0..9) x=y?
The condition is fulfilled if value x equals value y.
set a variable (x=0..9, y=0..9) x:=y
sets the variable x to value y
increment variable (x=0..9) x++
increments the variable x (for x=9, the x++=0)
disable the timer
minutes
Disable Relay 1 (only for operations mode 18)
Enable Relay 1 (only for operations mode 18)
Disable Relay 2 (only for operations mode 18)
Enable Relay 2 (only for operations mode 18)
Speed dialling key 00
Speed dialling key 01
Speed dialling key 99
Confirmation
#
#
:
#
#
#
www.behnke-online.com