Telecom Behnke a Serie Manuel page 71

Quick set-up (example)
(Always check with the operator)
▸ Connect the telephone
during the initialisation,
▸Enter set-up mode:
(0000 = security code in default setting)
▸Delay/hold button (in seconds):
▸Volume (volume level 1-9):
▸Activate group calling (max. 9):
(number of telephone numbers to be dialled)
▸ first telephone number:
▸second telephone number:
▸third telephone number:
▸up to the ninth telephone number:
(Please note: The receiver has to acknowledge the emergency call
with a DTMF tone/ any button)
▸Enable extended set-up:
▸Echo suppressor damping:
▸Reduces the feedback susceptibility)
▸Transmission signal amplification (microphone 1-7):
▸Receive signal amplification (speakers 1-7):
▸Routine call every 3 days on target telephone number x:
▸Endlessly repeat routine call,
▸Disable extended set-up:
▸Exit set-up mode:
www.behnke-online.com
Manual Door intercom devices a / b series 20 / 30 / 40 / 50 / 20-0028A/-0028B
line:
there
is a high-pitch beep for approx. 10
even if not acknowledged:
Connection
(code, value, confirmation)
seconds.
04,
1 3
06,
1
21, 1. Telephone number,
22, 2. Telephone number,
23, 3. Telephone number,
29, 9. Telephone number,
911, 15-20,
9921, 3*x,
9922, 0,
GB
*, 0000
, #
9
#
,
7 9
20, 1-9, #
#
#
#
#
900, 1, #
#
913, 4, #
914, 4, #
#
#
900, 0, #
*
71