Telecom Behnke a Serie Manuel page 67

Quick set-up
(Always check with the operator)
▸ Connect the telephone line: during the initialisation,
there is a high-pitch beep for approx. 10 seconds.
▸ Enter set-up mode:
▸ Enter telephone numbers
▸ first telephone number:
▸ second telephone number:
▸ third telephone number:
▸ up to the ninth telephone number:
▸ Activate group calling,
number of telephone numbers to be dialled:
(Please note: the call reception terminal station
has to acknowledge the call with a DTMF tone)
▸ Volume control (optimum setting = 7)
▸ Non-isolated button at alarm input:
▸ Activation of the 900-parameters:
▸ Echo suppressor damping (remove acoustic feedback):
▸ Microphone level:
▸ Cabin button: Closing contact (standard)
▸ Cabin button: Opening contact
(Please note: this configuration section must be activated
before connecting the opening contact)
▸ Deactivation of the 900-parameters:
▸ Exit set-up mode:
www.behnke-online.com
Manual Door intercom devices a / b series 20 / 30 / 40 / 50 / 20-0028A/-0028B a / b series 20 / 30 / 40 / 50 / 20-0028A/-0028B door intercom manual
Connection Connection
(code, value, confirmation)
*, 0000
21, telephone number,
22, telephone number,
23, telephone number,
29, telephone number,
20, 1 to
06,
1 7
17, 6,
900, 1,
911, 15 to 20,
913, 1 to
970, 0,
970, 1,
900, 0,
GB
D
#
#
#
#
9, #
, #
9
#
#
#
7, #
#
#
#
*
67